Bash Command Not Found Variable Assignment C++

An array is a variable containing multiple values may be of same type or of different type.  There is no maximum limit to the size of an array, nor any requirement that member variables be indexed or assigned contiguously. Array index starts with zero.

In this article, let us review 15 various array operations in bash.

This article is part of the on-going Bash Tutorial series. For those who are new to bash scripting, get a jump-start from the Bash Scripting Introduction tutorial.

1. Declaring an Array and Assigning values

In bash, array is created automatically when a variable is used in the format like,

name[index]=value
  • name is any name for an array
  • index could be any number or expression that must evaluate to a number greater than or equal to zero.You can declare an explicit array using declare -a arrayname.
$ cat arraymanip.sh #! /bin/bash Unix[0]='Debian' Unix[1]='Red hat' Unix[2]='Ubuntu' Unix[3]='Suse' echo ${Unix[1]} $./arraymanip.sh Red hat

To access an element from an array use curly brackets like ${name[index]}.

2. Initializing an array during declaration

Instead of initializing an each element of an array separately, you can declare and initialize an array by specifying the list of elements (separated by white space) with in a curly braces.

Syntax: declare -a arrayname=(element1 element2 element3)

If the elements has the white space character, enclose it with in a quotes.

#! /bin/bash $cat arraymanip.sh declare -a Unix=('Debian' 'Red hat' 'Red hat' 'Suse' 'Fedora');

declare -a declares an array and all the elements in the parentheses are the elements of an array.

3. Print the Whole Bash Array

There are different ways to print the whole elements of the array. If the index number is @ or *, all members of an array are referenced. You can traverse through the array elements and print it, using looping statements in bash.

echo ${Unix[@]} # Add the above echo statement into the arraymanip.sh #./t.sh Debian Red hat Ubuntu Suse

Referring to the content of a member variable of an array without providing an index number is the same as referring to the content of the first element, the one referenced with index number zero.

4. Length of the Bash Array

We can get the length of an array using the special parameter called $#.

${#arrayname[@]} gives you the length of the array.

$ cat arraymanip.sh declare -a Unix=('Debian' 'Red hat' 'Suse' 'Fedora'); echo ${#Unix[@]} #Number of elements in the array echo ${#Unix} #Number of characters in the first element of the array.i.e Debian $./arraymanip.sh 4 6

5. Length of the nth Element in an Array

${#arrayname[n]} should give the length of the nth element in an array.

$cat arraymanip.sh #! /bin/bash Unix[0]='Debian' Unix[1]='Red hat' Unix[2]='Ubuntu' Unix[3]='Suse' echo ${#Unix[3]} # length of the element located at index 3 i.e Suse $./arraymanip.sh 4

6. Extraction by offset and length for an array

The following example shows the way to extract 2 elements starting from the position 3 from an array called Unix.

$cat arraymanip.sh Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); echo ${Unix[@]:3:2} $./arraymanip.sh Suse Fedora

The above example returns the elements in the 3rd index and fourth index. Index always starts with zero.

7. Extraction with offset and length, for a particular element of an array

To extract only first four elements from an array element . For example, Ubuntu which is located at the second index of an array, you can use offset and length for a particular element of an array.

$cat arraymanip.sh #! /bin/bash Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); echo ${Unix[2]:0:4} ./arraymanip.sh Ubun

The above example extracts the first four characters from the 2nd indexed element of an array.

8. Search and Replace in an array elements

The following example, searches for Ubuntu in an array elements, and replace the same with the word ‘SCO Unix’.

$cat arraymanip.sh #!/bin/bash Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); echo ${Unix[@]/Ubuntu/SCO Unix} $./arraymanip.sh Debian Red hat SCO Unix Suse Fedora UTS OpenLinux

In this example, it replaces the element in the 2nd index ‘Ubuntu’ with ‘SCO Unix’. But this example will not permanently replace the array content.

9. Add an element to an existing Bash Array

The following example shows the way to add an element to the existing array.

$cat arraymanip.sh Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); Unix=("${Unix[@]}" "AIX" "HP-UX") echo ${Unix[7]} $./arraymanip.sh AIX

In the array called Unix, the elements ‘AIX’ and ‘HP-UX’ are added in 7th and 8th index respectively.

10. Remove an Element from an Array

unset is used to remove an element from an array.unset will have the same effect as assigning null to an element.

$cat arraymanip.sh #!/bin/bash Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); unset Unix[3] echo ${Unix[3]}

The above script will just print null which is the value available in the 3rd index. The following example shows one of the way to remove an element completely from an array.

$ cat arraymanip.sh Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); pos=3 Unix=(${Unix[@]:0:$pos} ${Unix[@]:$(($pos + 1))}) echo ${Unix[@]} $./arraymanip.sh Debian Red hat Ubuntu Fedora UTS OpenLinux

In this example, ${Unix[@]:0:$pos} will give you 3 elements starting from 0th index i.e 0,1,2 and ${Unix[@]:4} will give the elements from 4th index to the last index. And merge both the above output. This is one of the workaround to remove an element from an array.

11. Remove Bash Array Elements using Patterns

In the search condition you can give the patterns, and stores the remaining element to an another array as shown below.

$ cat arraymanip.sh #!/bin/bash declare -a Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora'); declare -a patter=( ${Unix[@]/Red*/} ) echo ${patter[@]} $ ./arraymanip.sh Debian Ubuntu Suse Fedora

The above example removes the elements which has the patter Red*.

12. Copying an Array

Expand the array elements and store that into a new array as shown below.

#!/bin/bash Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); Linux=("${Unix[@]}") echo ${Linux[@]} $ ./arraymanip.sh Debian Red hat Ubuntu Fedora UTS OpenLinux

13. Concatenation of two Bash Arrays

Expand the elements of the two arrays and assign it to the new array.

$cat arraymanip.sh #!/bin/bash Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); Shell=('bash' 'csh' 'jsh' 'rsh' 'ksh' 'rc' 'tcsh'); UnixShell=("${Unix[@]}" "${Shell[@]}") echo ${UnixShell[@]} echo ${#UnixShell[@]} $ ./arraymanip.sh Debian Red hat Ubuntu Suse Fedora UTS OpenLinux bash csh jsh rsh ksh rc tcsh 14

It prints the array which has the elements of the both the array ‘Unix’ and ‘Shell’, and number of elements of the new array is 14.

14. Deleting an Entire Array

unset is used to delete an entire array.

$cat arraymanip.sh #!/bin/bash Unix=('Debian' 'Red hat' 'Ubuntu' 'Suse' 'Fedora' 'UTS' 'OpenLinux'); Shell=('bash' 'csh' 'jsh' 'rsh' 'ksh' 'rc' 'tcsh'); UnixShell=("${Unix[@]}" "${Shell[@]}") unset UnixShell echo ${#UnixShell[@]} $ ./arraymanip.sh 0

After unset an array, its length would be zero as shown above.

15. Load Content of a File into an Array

You can load the content of the file line by line into an array.

#Example file $ cat logfile Welcome to thegeekstuff Linux Unix $ cat loadcontent.sh #!/bin/bash filecontent=( `cat "logfile" `) for t in "${filecontent[@]}" do echo $t done echo "Read file content!" $ ./loadcontent.sh Welcome to thegeekstuff Linux Unix Read file content!

In the above example, each index of an array element has printed through for loop.

Recommended Reading

Bash 101 Hacks, by Ramesh Natarajan. I spend most of my time on Linux environment. So, naturally I’m a huge fan of Bash command line and shell scripting. 15 years back, when I was working on different flavors of *nix, I used to write lot of code on C shell and Korn shell. Later years, when I started working on Linux as system administrator, I pretty much automated every possible task using Bash shell scripting. Based on my Bash experience, I’ve written Bash 101 Hacks eBook that contains 101 practical examples on both Bash command line and shell scripting. If you’ve been thinking about mastering Bash, do yourself a favor and read this book, which will help you take control of your Bash command line and shell scripting.

If you enjoyed this article, you might also like..



Tagged as:Bash Array String, Bash Arrays, Bash Script Array, Bash Scripting Tutorial, Bash Tutorial, Echo Array, Linux Array, Unix Array

NextPrevious

Shell Script Basics

Writing a shell script is like riding a bike. You fall off and scrape your knees a lot at first. With a bit more experience, you become comfortable riding them around town, but also quickly discover why most people drive cars for longer trips.

Shell scripting is generally considered to be a glue language, ideal for creating small pieces of code that connect other tools together. While shell scripts can be used for more complex tasks, they are usually not the best choice.

If you have ever successfully trued a bicycle wheel (or paid someone else to do so), that’s similar to learning the basics of shell scripting. If you don’t true your scripts, they wobble. Put another way, it is often easy to write a script, but it can be more challenging to write a script that consistently works well.

This chapter and the next two chapters introduce the basic concepts of shell scripting. The remaining chapters in this document provide additional breadth and depth. This document is not intended to be a complete reference on writing shell scripts, nor could it be. It does, however, provide a good starting point for beginners first learning this black art.

Shell Script Dialects

There are many different dialects of shell scripts, each with their own quirks, and some with their own syntax entirely. Because of these differences, the road to good shell scripting can be fraught with peril, leading to script failures, misbehavior, and even outright data loss.

To that end, the first lesson you must learn before writing a shell script is that there are two fundamentally different sets of shell script syntax: the Bourne shell syntax and the C shell syntax. The C shell syntax is more comfortable to many C programmers because the syntax is somewhat similar. However, the Bourne shell syntax is significantly more flexible and thus more widely used. For this reason, this document only covers the Bourne shell syntax.

The second hard lesson you will invariably learn is that each dialect of Bourne shell syntax differs slightly. This document includes only pure Bourne shell syntax and a few BASH-specific extensions. Where BASH-specific syntax is used, it is clearly noted.

The terminology and subtle syntactic differences can be confusing—even a bit overwhelming at times; had Dorothy in The Wizard of Oz been a programmer, you might have heard her exclaim, "BASH and ZSH and CSH, Oh My!" Fortunately, once you get the basics, things generally fall into place as long as you avoid using shell-specific features. Stay on the narrow road and your code will be portable.

Some common shells are listed below, grouped by script syntax:

Bourne-compatible shells

C-shell-compatible shells

  • (C shell to Bourne shell translator/emulator)

Many of these shells have more than one variation. Most of these variations are denoted by prefixing the name of an existing shell with additional letters that are short for whatever differentiates them from the original shell. For example:

  • The shell is a variant of . Being a public domain rewrite of AT&T's , it stands for "Public Domain Korn SHell." (This is a bit of a misnomer, as a few bits are under a BSD-like open source license. However, the name remains.)

  • The shell is an extension of . It stands for the TENEX C SHell, as some of its enhancements were inspired by the TENEX operating system.

  • The shell is an extension of . It stands for the Bourne Again SHell. (Oddly enough, it is not a variation of , the Almquist SHell, though both are Bourne shell variants. This should not be confused with the shell—an -derived shell used in some Linux distributions—whose name stands for the Debian Almquist SHell.)

And so on. In general, with the exception of and , it is usually safe to assume that any modern login shell is compatible with Bourne shell syntax.

Note: Because the C shell syntax is not well suited to scripting beyond a very basic level, this document does not cover C shell variants in depth. For more information, see She Sells C Shells.

She Sells C Shells

The C shell is popular among some users as a shell for interacting with the computer because it allows simple scripts to be written more easily. However, the C shell scripting language is limited in a number of ways, many of which are hard to work around. For this reason, use of the C shell scripting language for writing complex scripts is not recommended. For more information, read “CSH Programming Considered Harmful” at http://www.faqs.org/faqs/unix-faq/shell/csh-whynot/. Although many of the language flaws it describes are fixed by some modern C shells, if you are writing a script that must work on multiple computers across different operating systems, you cannot always guarantee that the installed C shell will support those extensions.

However, the C shell scripting language has its uses, particularly for writing scripts that set up environment variables for interactive shell environments, execute a handful of commands in order, or perform other relatively lightweight chores. To support such uses, the C shell syntax is presented alongside the Bourne shell syntax within this "basics” chapter where possible.

Outside of this chapter, this document does not generally cover the C shell syntax. If after reading this, you still want to write a more complex script using the C shell programming language, you can find more information in on the C shell in the manual page for .

Shell Variables and Printing

What follows is a very basic shell script that prints “Hello, world!” to the screen:

#!/bin/sh
echo "Hello, world!"

The first thing you should notice is that the script starts with ‘’. This is known as an interpreter line. If you don’t specify an interpreter line, the default is usually the Bourne shell (). However, it is best to specify this line anyway for consistency.

The second thing you should notice is the command. The command is nearly universal in shell scripting as a means for printing something to the user’s screen. (Technically speaking, is generally a shell builtin, but it also exists as as standalone command, . You can read more about the difference between the builtin version and the standalone version in echo and Use Shell Builtins Wherever Possible.)

If you’d like, you can try this script by saving those lines in a text file (say “hello_world.sh”) in your home directory. Then, in Terminal, type:

chmod u+x hello_world.sh
./hello_world.sh

Of course, this script isn’t particularly useful. It just prints the words “Hello, world!“ to your screen. To make this more interesting, the next script throws in a few variables.

#!/bin/sh
FIRST_ARGUMENT="$1"
echo "Hello, world $FIRST_ARGUMENT!"

Type or paste this script into the text editor of your choice (see Creating Text Files in Your Home Directory for help creating a text file) and save the file in your home directory in a file called .

Once you have saved the file in your home directory, type ‘’ in Terminal to make it executable. Finally, run it with ‘’. You should see “Hello, world leaders!” printed to your screen.

This script provides an example of a variable assignment. The variable contains the first argument passed to the shell script. In this example, the script makes a copy and stores it into a variable called , then prints that variable.

You should immediately notice that variables may or may not begin with a dollar sign, depending on how you are using them. If you want to dereference a variable, you precede it with a dollar sign. The shell then inserts the contents of the variable at that point in the script. For all other uses, you do not precede it with a dollar sign.

Important: You generally do not want to prefix the variable on the left side of an assignment statement with a dollar sign. Because starts out empty, if you used a dollar sign, the first line:

$FIRST_ARGUMENT="$1" # DO NOT DO THIS!
would be expanded by the shell into the following complete gibberish:
="myfirstcommandlineargument"
This is clearly not what you want (and produces an error). Because of the order in which the statement is evaluated, the above assignment statement would still fail with an error even if were nonempty. (If you really want to assign a value to a variable whose name is in a different variable, use , as described in Using the eval Builtin for Data Structures, Arrays, and Indirection.)

You should also notice that the argument to echo is surrounded by double quotation marks. This is explained further in the next section, Using Arguments And Variables That Contain Spaces.

C Shell Note: The syntax for assignment statements in the C shell is rather different. Instead of an assignment statement, the C shell uses the and builtins to set variables as shown below:

set VALUE = "Four"
# or...
setenv VALUE "Four"
echo "$VALUE score and seven years ago...."
The functional difference between and is described in Exporting Shell Variables.

Using Arguments And Variables That Contain Spaces

Take a second look at the script from the previous section:

#!/bin/sh
FIRST_ARGUMENT="$1"
echo "Hello, world $FIRST_ARGUMENT!"

Notice that the echo statement is followed by a string surrounded by quotation marks. Normally, the shell uses spaces to separate arguments to commands. Outside of quotation marks, the shell would treat “Hello,” and “world” as separate arguments to .

By surrounding the string with double quote marks, the shell treats the entire string as a single argument to even though it contains spaces.

To see how this works, save the script above as (if you haven’t already), then type the following commands:

./test.sh leaders and citizens
./test.sh "leaders and citizens"

The first line above prints “Hello, world leaders!” because the space after “leaders” ends the first argument (). Inside the script, the variable contains “leaders”, contains “and”, and contains “citizens”.

The second line above prints “Hello, world leaders and citizens!” because the quotation marks on the command line cause everything within them to be grouped as a single argument.

Notice also that there are similar quotation marks on the right side of the assignment statement:

With most modern shells, these double quotation marks are not required for this particular assignment statement (because there are no literal spaces on the right side), but they are a good idea for maximum compatibility. See Historical String Parsing in Historical Footnotes and Arcana to learn why.

When assigning literal strings (rather than variables containing strings) to a variable, however, you must surround any spaces with quotation marks. For example, the following statement does not do what you might initially suspect:

If you type this statement, the Bourne shell gives you an error like this:

sh: is: command not found

The reason for this seemingly odd error is that the assignment statement ends at the first space, so the next word after that statement is interpreted as a command to execute. See Overriding Environment Variables for Child Processes (Bourne Shell) for more details.

Instead, write this statement as:

Using quotation marks is particularly important when working with variables that contain filenames or paths. For example, type the following commands:

mkdir "/tmp/My Folder"
FILENAME="/tmp/My Folder"
ls "$FILENAME"
ls $FILENAME

The above example creates a directory in called “My Folder”. (Don’t worry about deleting it because gets wiped every time you reboot.) It then attempts to list the files in that directory. The first time, it uses quotation marks. The second time, it does not. Notice that the shell misinterprets the command the second time as being an attempt to list the files in and the files in .

Handling Quotation Marks in Strings

In modern Bourne shells, expansion of variables, occurs after the statement itself is fully parsed by the shell. (See Historical String Parsing in Historical Footnotes and Arcana for more information.) Thus, as long as the variable is enclosed in double quote marks, you do not get any execution errors even if the variable’s value contains double-quote marks.

However, if you are using double quote marks within a literal string, you must quote that string properly. For example:

MYSTRING="The word of the day is \"sedentary\"."

C Shell Note: The C shell handling of backslashes within double-quoted strings is different. In the C shell, the previous example should be changed to:

MYSTRING="The word of the day is "\""sedentary"\""."
./test.sh \""leaders"\"
to achieve the desired effect. This difference is described further in Parsing, Variable Expansion, and Quoting.

This quoting technique also applies to literal strings within commands entered on the command line. For example, using the script from earlier in Shell Variables and Printing, the command:

prints the phrase “Hello, world “leaders”!”

The details of quotes as they apply to variable expansion are explained in Parsing, Variable Expansion, and Quoting. (Variable safety with shells that predate this behavior is generally impractical. Fortunately, the modern behavior has been the norm since the mid-1990s.)

Shell scripts also allow the use of single quote marks. Variables between single quotes are not replaced by their contents. Be sure to use double quotes unless you are intentionally trying to display the actual name of the variable. You can also use single quotes as a way to avoid the shell interpreting the contents of the string in any way. These differences are described further in Parsing, Variable Expansion, and Quoting.

Exporting Shell Variables

One key feature of shell scripts is that variables are typically limited in their scope to the currently running script. The scoping of variables is described in more detail in Subroutines, Scoping, and Sourcing. For now, though, it suffices to say that variables generally do not get passed on to scripts or tools that they execute.

Normally, this is what you want. Most variables in a shell script do not have any meaning to the tools that they execute, and thus represent clutter and the potential for variable namespace collisions if they are exported. Occasionally, however, you will find it necessary to make a variable's value available to an outside tool. To do this, you must export the variable. These exported variables are commonly known as environment variables because they affect the execution of every script or tool that runs but are not part of those scripts or tools themselves.

A classic example of an environment variable that is significant to scripts and tools is the variable. This variable specifies a list of locations that the shell searches when executing programs by name (without specifying a complete path). For example, when you type on the command line, the shell searches in the locations specified in (in the order specified) until it finds an executable called (or runs out of locations, whichever comes first).

The details of exporting shell variables differ considerably between the Bourne shell and the C shell. Thus, the following sections explain these details in a shell-specific fashion.

Using the export Builtin (Bourne Shell)

Generally speaking, the first time you assign a value to an environment variable such as the variable, the Bourne shell creates a new, local copy of this shell variable that is specific to your script. Any tool executed from your script is passed the original value of inherited from whatever script, tool, or shell that launched it.

With the BASH shell, however, any variable inherited from the environment is automatically exported by the shell. Thus, in some versions of OS X, if you modify inherited environment variables (such as ) in a script, your local changes will be seen automatically by any tool or script that your script executes. Thus, in these versions of OS X, you do not have to explicitly use the statement when modifying the variable.

Because different Bourne shell variants handle these external environment variables differently (even among different versions of OS X), this creates two minor portability problems:

  • A script written without the statement may work on some versions of OS X, but will fail on others. You can solve this portability problem by using the builtin, as described in this section.

  • A shell script that changes variables such as will alter the behavior of any script that it executes, which may or may not be desirable. You can solve this problem by overriding the environment variable when you execute each individual tool, as described in Overriding Environment Variables for Child Processes (Bourne Shell).

To guarantee that your modifications to a shell variable are passed to any script or tool that your shell script calls, you must use the builtin. You do not have to use this command every time you change the value; the variable remains exported until the shell script exits.

For example:

export PATH="/usr/local/bin:$PATH"
# or
PATH="/usr/local/bin:$PATH"
export PATH

Either of these statements has the same effect—specifically, they export the local notion of the environment variable to any command that your script executes from now on. There is a small catch, however. You cannot later undo this export to restore the original global declaration. Thus, if you need to retain the original value, you must store it somewhere yourself.

In the following example, the script stores the original value of the environment variable, exports an altered version, executes a command, and restores the old version.

ORIGPATH="$PATH"
PATH="/usr/local/bin:$PATH"
export PATH
# Execute some command here---perhaps a
# modified ls command....
ls
PATH="$ORIGPATH"

If you need to find out whether an environment variable (whether inherited by your script or explicitly set with the directive) was set to empty or was never set in the first place, you can use the command to obtain a complete list of defined variables and use to see if it is in the list. (You should note that although is a csh builtin, it is also a standalone command in .)

For example:

DEFINED=`printenv | grep -c '^VARIABLE='`

The resulting variable will contain 1 if the variable is defined in the environment or 0 if it is not.

Overriding Environment Variables for Child Processes (Bourne Shell)

Because the BASH Bourne shell variant automatically exports all variables inherited from its environment, any changes you make to preexisting environment variables such as are automatically inherited by any tool or script that your script executes. (This is not true for other Bourne shell variants; see Using the export Builtin (Bourne Shell) for further explanation.)

While automatic export is usually convenient, you may sometimes wish to change a preexisting environment variable without modifying the environment of any script or tool that your script executes. For example, if your script executes a number of tools in , it may be convenient to change the value of to include . However, you may not want child processes to also look in .

This problem is easily solved by overriding the environment variable on a per-execution basis. Consider the following script:

This script prints the value of the variable . Normally, this variable is empty, so this script just prints a blank line. Save the script as , then type the following commands:

chmod a+x printmyvar.sh # makes the script executable
MYVAR=7 ./printmyvar.sh # runs the script
echo "MYVAR IS $MYVAR" # prints the variable

Notice that the assignment statement applies to the command that follows it. The value of is altered in the environment of the command , so the script prints the number 7. However, the original (empty) value is restored after executing that command, so the echo statement afterwards prints an empty string for the value of .

Thus, to modify the variable locally but execute a command with the original value, you can write a script like this:

#!/bin/sh
GLOBAL_PATH="$PATH"
PATH=/usr/local/bin
PATH="$GLOBAL_PATH" /bin/ls

Using the setenv Builtin (C shell)

In the C shell, variables are exported if you set them with , but not if you set them with . Thus, if you want your shell variable modifications to be seen by any tool or script that you call, you should use the builtin. This builtin is the C shell equivalent to issuing an assignment statement with the builtin in the Bourne shell.

setenv VALUE "Four"
echo "VALUE is '$VALUE'."

If you want your shell variables to only be available to your script, you should use the builtin (described in Shell Variables and Printing). The builtin is equivalent to a simple assignment statement in the Bourne shell.

set VALUE = "Four"
echo "VALUE is '$VALUE'."

Notice that the local variable version requires an equals sign (), but the exported environment version does not (and produces an error if you put one in).

To remove variables in the C shell, you can use the or builtin. For example:

setenv VALUE "Four"
unsetenv VALUE
set VALUE = "Four"
unset VALUE
echo "VALUE is '$VALUE'."

This will generate an error message. In the C shell, it is not possible to print the value of an undefined variable, so if you think you may need to print the value later, you should set it to an empty string rather than using or .

If you need to test an environment variable (not a shell-local variable) that may or may not be part of your environment (a variable set by whatever process called your script), you can use the builtin. This prints the value of a variable if set, but prints nothing if the variable is not set, and thus behaves just like the variable behaves in the Bourne shell.

For example:

set X = `printenv VALUE`
echo "X is "\"$X\"

This prints if the variable is either empty or undefined. Otherwise, it prints the value of the variable between the quotation marks.

If you need to find out if a variable is simply empty or is actually not set, you can also use to obtain a complete list of defined variables and use to see if it is in the list. For example:

set DEFINED = `printenv | grep -c '^VARIABLE='`

The resulting variable will contain 1 if the variable is defined in the environment or 0 if it is not.

Overriding Environment Variables for Child Processes (C Shell)

Unlike the Bourne shell, the C shell does not provide a built-in syntax for overriding environment variables when executing external commands. However, it is possible to simulate this either by using the command.

The best and simplest way to do this is with the command. For example:

env PATH="/usr/local/bin" /bin/ls

As an alternative, you can use the builtin to make a temporary copy of any variable you need to override, change the value, execute the command, and restore the value from the temporary copy.

You should notice, however, that whether you use the command or manually make a copy, the variable is altered prior to searching for the command. Because the variable controls where the shell looks for programs to execute, you must therefore explicitly provide a complete path to the command or it will not be found (unless you have a copy in , of course). The environment variable is explained in Special Shell Variables.

As a workaround, you can determine the path of the executable using the command prior to altering the environment variable.

set GLOBAL_PATH = "$PATH"
set LS = `which ls`
setenv PATH "/usr/local/bin"
$LS
setenv PATH "$GLOBAL_PATH"
unset GLOBAL_PATH

Or, using :

set LS = `which ls`
env PATH='/usr/local/bin' $LS

The use of the backtick (`) operator in this fashion is described in Inline Execution.

Security Note: If your purpose for overriding an environment variable is to prevent disclosure of sensitive information to a potentially untrusted process, you should be aware that if you use for the copy, the called process has access to that temporary copy just as it had access to the original variable. To avoid this, be sure to create the temporary copy using the builtin instead of .

Deleting Shell Variables

For the most part, in Bourne shell scripts, when you need to get rid of a variable, setting it to an empty string is sufficient. However, in long-running scripts that might encounter memory pressure, it can be marginally useful to delete the variable entirely. To do this, use the builtin.

For example:

MYVAR="this is a test"
unset MYVAR
echo "MYVAR IS \"$MYVAR\""

The builtin can also be used to delete environment variables.

C Shell Note: The C shell builtin is identical except that it cannot be used to delete environment variables. Use instead, as shown in Overriding Environment Variables for Child Processes (C Shell).

Also, in C shell, if you try to use a deleted variable, it is considered an error. (In Bourne shell, an unset variable is treated like an empty string.)

NextPrevious


One thought on “Bash Command Not Found Variable Assignment C++

Leave a Reply

Your email address will not be published. Required fields are marked *